Digi IX40 User Manual page 130

Interfaces
(config)> network modem modem carrier_switch false
(config)>
10. Set the type of cellular technology that this modem should use to access the cellular network:
(config)> network modem modem access_tech value
(config)>
Available options for value vary depending on the modem type. To determine available
options:
(config)> network modem modem access_tech ?
Access technology: The cellular network technology that the modem may use.
Format:
2G
3G
4G
4GM
4GT
5G
5G-ALL
5G-NSA
all
Default value: all
Current value: all
(config)>
The default is all, which uses the best available technology.
11. Set whether the modem should use the main antenna, the auxiliary antenna, or both the main
and auxiliary antennas:
(config)> network modem modem antenna value
(config)>
where value is one of the following:
n main
n aux
n both
12. Configure default slice information:
a. Enable the default slice for this modem:
(config)> network modem modem default_slice_info enabled true
(config)>
b. Set the type of slice to be used:
(config)> network modem modem default_slice_info sst value
(config)>
IX40 User Guide
Wide Area Networks (WANs)
130