Routing
a. Click Network > Routes > Policy-based routing.
b. Click the g to add a new route policy.
c. For Label, type VoIP phone.
d. For Interface, select .
e. Configure the source as the MACaddress of the VoIP phone:
i. Click to expand Source address.
ii. For Type, select MAC address.
iii. For MAC address, type 26:88:0E:23:50:C2.
f. Configure the destination zone:
i. Click to expand Destination address.
ii. For Type, select Zone.
iii. For Zone, select CellularWAN.
6. Create a packet filtering rule that rejects all other LAN packets on the cellular WAN interface.
a. Click Firewall > Packet filtering.
b. Click the g to add a new packet filtering rule.
c. For Label, type Reject LAN traffic to cellular WAN.
d. For Action, select Drop.
IX40 User Guide
IP routing
318