Configure Realport Mode Using The Digi Navigator; Installation And Configuration Process; Digi Navigator Features - Digi IX40 User Manual

Serial port
5. Set the type of flow control used by the device to which you want to connect:
(config)>serial port1 flow value
(config)>
where value is one of:
n none
n rts/cts
n xon/xoff
7. Save the configuration and apply the change
(config)> save
Configuration saved.
>
8. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.

Configure RealPort mode using the Digi Navigator

You can configure RealPort mode for the IX40 using the Digi Navigator application. When you install
Digi Navigator on your computer, the RealPort application is automatically installed as well. Each
time the Digi Navigator is launched on your computer, any Digi devices that are on the network and
support device discovery are discovered by the Navigator.
With Digi Navigator, For each of the devices that have been discovered, you can set all serial ports on
the device to RealPort mode, and then also enable the RealPort service. The COM ports on your
laptop are also configured. These processes ensure that RealPort is configured on the device and on
your computer.
Operating system
The Digi Navigator can only be installed on a computer with a Windows OS. If you are using Linux,
you can manually install and configure RealPort without Digi Navigator. For the Linux installation
process, refer to the

Installation and configuration process

These steps explain how to install and configure the Digi Navigator.
Step 1: Install the Digi Navigator
Step 2: Configure RealPort on a Digi device from the Digi Navigator

Digi Navigator features

Digi Navigator application features
n
Manage the RealPort configured Digi device list
n
Access the web UI from the Digi Navigator
n
Filter devices for display in the Digi Navigator
n
Access Digi Remote Manager from the Digi Navigator
n
IX40 User Guide
Get started: Install RealPort for
Configure RealPort mode using the Digi Navigator
LINUXin the RealPort Installation User's Guide.
273