Table of Contents
Advertisement
Services
Required configuration items
Enable the location service.
n
The hostname or IP address of the remote host to which the location messages will be
n
forwarded.
The communication protocol, either TCP or UDP.
n
The destination port on the remote host to which the messages will be forwarded.
n
Message protocol type of the messages being forwarded, either NMEA or TAIP.
n
Additional configuration items
n
Additional remote hosts to which the location messages will be forwarded.
n
Location update interval, which determines how often the device will forward location
information to the remote hosts.
A description of the remote hosts.
n
Specific types of NMEA or TAIP messages that should be forwarded.
n
If the message protocol is NMEA, configure a talker ID to be used for all messages.
n
Text that will be prepended to the forwarded message.
n
A vehicle ID that is used in the TAIP ID message and can also be prepended to the forwarded
n
message.
Configure the IX40 device to forward location information:
É
Web
1. Log into Digi Remote Manager, or log into the local Web UI as a user with full Admin access
rights.
2. Access the device configuration:
Remote Manager:
a. Locate your device as described in
device.
b. Click the Device ID.
c. Click Settings.
d. Click to expand Config.
Local Web UI:
a. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click Services > Location > Destination servers.
4. For Add destination server, click g .
IX40 User Guide
Use Digi Remote Manager to view and manage your
Location information
571
Advertisement
Table of Contents
