Digi IX40 User Manual page 393

Virtual Private Networks (VPN)
n
n
n
n
IX40 User Guide
If http is set, set the URL of the web server.
(config vpn ipsec tunnel ipsec_example surelink tests 1)> http url
(config vpn ipsec tunnel ipsec_example surelink tests 1)>
dns_configured: Tests communication with DNS servers that are either provided by
DHCP, or statically configured for this interface.
interface_up: Tests the current status of the interface. The test fails if the interface
is down. Failing this test infers that all other tests fail.
If interface_up is set, complete the following:
Set the amount of time that the interface is down before the test can be
l
considered to have failed.
(config vpn ipsec tunnel ipsec_example surelink tests 1)> interface_down_time
value
(config vpn ipsec tunnel ipsec_example surelink tests 1)>
where value is any number of weeks, days, hours, minutes, or seconds, and
takes the format number{w|d|h|m|s}.
For example, to set interface_down_time to ten minutes, enter either 10m or
600s:
(config vpn ipsec tunnel ipsec_example surelink tests 1)> interface_down_time 600s
(config)>
Set the amount of time to wait for the interface to connect for the first time
l
before the test is considered to have failed.
(config vpn ipsec tunnel ipsec_example surelink tests 1)> interface_timeout value
(config vpn ipsec tunnel ipsec_example surelink tests 1)>
where value is any number of weeks, days, hours, minutes, or seconds, and
takes the format number{w|d|h|m|s}.
For example, to set interface_timeout to ten minutes, enter either 10m or
600s:
(config vpn ipsec tunnel ipsec_example surelink tests 1)> interface_timeout 600s
(config)>
custom_test: Tests the interface with custom commands.
If custom_test is set, set the commands to run to perform the test:
(config vpn ipsec tunnel ipsec_example surelink tests 1)> custom_test_commands
" string "
(config vpn ipsec tunnel ipsec_example surelink tests 1)>
tcp_connection: Tests that the interface can reach a destination port on the
configured host.
IPsec
393