Digi IX40 User Manual page 206

Interfaces
Required configuration items
Disable the DHCP server, if it is enabled.
n
IP address of the primary DHCP relay server, to define the relay server that will respond to
n
DHCP requests.
Additional configuration items
n IP address of additional DHCP relay servers.
É
Web
1. Log into Digi Remote Manager, or log into the local Web UI as a user with full Admin access
rights.
2. Access the device configuration:
Remote Manager:
a. Locate your device as described in
device.
b. Click the Device ID.
c. Click Settings.
d. Click to expand Config.
Local Web UI:
a. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click Network > Interfaces.
4. Click to expand an existing LAN, or create a new LAN. See
(LAN).
5. Disable the DHCP server, if it is enabled:
a. Click to expand IPv4 > DHCP server.
b. Click Enable to toggle off the DHCP server.
6. Click to expand DHCP relay.
7. For Add DHCP Server:, click g .
8. For DHCP server address, type the IP address of the relay server.
9. Repeat for each additional DHCP relay server.
10. Click Apply to save the configuration and apply the change.
Command line
IX40 User Guide
Use Digi Remote Manager to view and manage your
Configure a Local Area Network
Local Area Networks (LANs)
206