Table of Contents
Advertisement
Interfaces
Note
You can use the
and determine their PLMN ID. See
5. Save the configuration and apply the change
(config)> save
Configuration saved.
>
6. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.
Scan for available cellular carriers
You can scan for available carriers and determine their network PLMN ID by using the
command at the Admin CLI.
É
Web
Log into the IX40 WebUI as a user with full Admin access rights.
1. From the main menu, click Status > Modems.
2. croll to the Connection Status section and click SCAN.
The Carrier Scan window opens.
3. (Optional) Change the Timeout for the carrier scan. The default is 300 seconds.
4. When the Carrier Scan window opens, the results of the most recent previous scan are
displayed. If there is no previous scan available, or to refresh the list, click SCAN.
5. The current carrier is highlighted in green. To switch to a different carrier:
a. Highlight the appropriate carrier and click SELECT.
The Carrier selection dialog opens.
IX40 User Guide
modem scan
command at the Admin CLI to scan for available carriers
Scan for available cellular carriers
Wide Area Networks (WANs)
for details.
modem scan
144
Advertisement
Table of Contents
