Table of Contents
Advertisement
System administration
>
n
Show more detailed system information:
1. Select the device in Remote Manager and click Actions > Open Console, or log into the
IX40 local command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an Access
selection menu. Type admin to access the Admin CLI.
2. Enter show system verbose at the prompt:
> show system verbose
Model
Serial Number
SKU
Hostname
MAC Address
Hardware Version
Firmware Version
Alt. Firmware Version : 23.12.1.56
Alt. Firmware Build Date : Fri, Jan 12, 2024 12:10:00
Bootloader Version
Schema Version
Timezone
Current Time
CPU
Uptime
Load Average
RAM Usage
Temperature
Location
Contact
Disk
----
Disk /etc/config Usage : 18.421MB/4546.371MB(0%)
Disk /var/log_mnt Usage : 0.104MB/14.868MB(1%)
Disk /opt Usage
Disk /tmp Usage
Disk /var Usage
>
Configure system information
You can configure information related to your IX40 device, such as providing a name and location for
the device.
IX40 User Guide
: Digi IX40
: IX40xxxxxxxxyyyyxx
: IX40
: IX40
: DF:DD:E2:AE:21:18
: 50001947-01 1P
: 23.12.1.56
: 19.7.23.0-15f936e0ed
: 715
: UTC
: Thu, Jan 11, 2024 12:10:00 +0000
: 1.4%
: 6 days, 6 hours, 21 minutes, 57 seconds (541317s)
: 0.01, 0.03, 0.02
: 119.554MB/1878.984MB(6%)
: 40C
:
:
: 215.739MB/458.328MB(50%)
: 0.003MB/120.0MB(0%)
: 0.816MB/32.0MB(3%)
Configure system information
849
Advertisement
Table of Contents
