Digi IX40 User Manual page 719

User authentication
Note When Primary Responder mode is enabled, Telnet is not available. For more information
about Primary Responder mode, see
Primary Responder
Serial access: Users with Serial access have the ability to log into the IX40 device by using the
n
serial console.
Preconfigured authentication groups
The IX40 device has two preconfigured authentication groups:
The admin group is configured by default to have full Admin access.
n
The serial group is configured by default to have Serial access.
n
The preconfigured authentication groups cannot be deleted, but the access rights defined for the
group are configurable.
This section contains the following topics:
Change the access rights for a predefined group
Add an authentication group
Delete an authentication group
IX40 User Guide
Differences between standard firmware operation and
mode.
Authentication groups
720
722
726
719