Show Modbus Gateway Status And Statistics - Digi IX40 User Manual

Services
7. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.

Show Modbus gateway status and statistics

You can view status and statistics about location information from either the WebUI or the command
line.
É
Web
Log into the IX40 WebUI as a user with full Admin access rights.
1. On the menu, select Status > Modbus Gateway.
The Modbus Gateway page appears.
Statistics related to the Modbus gateway server are displayed. If the message Server
connections not available is displayed, this indicates that there are no connected clients.
To view information about Modbus gateway clients, click Clients.
n
To view statistics that are common to both the clients and server, click Common
n
Statistics.
To view configuration details about the gateway, click the ­ (configuration) icon in the
n
upper right of the gateway's status pane.
Command line
1. Select the device in Remote Manager and click Actions > Open Console, or log into the IX40
local command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
2. Use the show modbus-gateway
> show modbus-gateway
Server Connection IP Address Port Uptime
----------------- ----------- ----- ------
modbus_socket
modbus_socket
Client
-------------------- ------
modbus_socket_41
modbus_socket_21
modbus_serial_client 428
>
If the message Server connections not available is displayed, this indicates that there are no
connected clients.
IX40 User Guide
command at the system prompt:
10.45.1.139 49570 6
10.45.1.139 49568 13
Uptime
0
0
Modbus gateway
604