Table of Contents
Advertisement
Services
Use Digi Remote Manager to enable and configure WAN bonding on
multiple devices
Note
WAN bonding support must be enabled in Digi Remote Manager. Contact your Digi sales
representative for information.
You must also set up the WAN bonding server. This can be done using one of three mechanisms:
n
Set up a WAN bonding server on physical hardware or a Virtual Private Server (VPS) in your
local environment. See
n
Unwired Networks
mainly on locations in the United States, Europe, and Australia. Contact them for WAN bonding
hosting and configuration services.
n
Digi Professional Services
You can also setup a trial server at
To use Remote Manager to enable and configure WAN bonding on multiple devices:
1. Add the WAN bonding entitlement to your device in Remote Manager:
a. Log into
b. From the Remote Manager main menu, click ® Management > ! Subscriptions.
c. In the WAN Bonding entitlement card, click and select Assign to Device.
d. Select the appropriate devices.
2. In Remote Manager, create a Configuration template. See
instructions.
3. For the Settings step in the configuration:
a. Click Network > SD-WAN > WAN bonding.
b. Select and toggle on Enable.
c. Select Hostname and type the hostname or IPv4 address of the external server hosting the
WAN bonding server.
d. Select Tunnel username and Tunnel password, and set them to Require override. Later
in this procedure we will create an override file that includes the username and password
that you created when you configure device-specific tunnel settings on the WAN bonding
server:
i. Select Tunnel username.
ii. From the Common value menu, select Require override:
IX40 User Guide
Bondix documentation
maintains a number of WAN Bonding servers throughout the world, focused
can setup, manage, and maintain your WAN bonding servers.
the Bondix website
Remote
Manager.
for instructions.
for testing purposes.
the Remote Manager User Guide
WAN bonding
for
544
Advertisement
Table of Contents
