Table of Contents
Advertisement
Command line interface
Similar behavior is available with any command name:
> config network interface <space>
..
...
loopback
> config network interface
Auto-complete commands and parameters
When entering a command and parameter, press the Tab key to cause the command line interface to
auto-complete as much of the command and parameter as possible. Typing the space bar has similar
behavior. If multiple commands are available that will match the entered text, auto-complete is not
performed and the available commands are displayed instead.
Auto-complete applies to these command elements only :
n
Command names. For example, typing net<Tab> auto-completes the command as network.
n
Parameter names. For example:
ping hostname int<Tab> auto-completes the parameter as interface.
l
system b<Tab> auto-completes the parameter as backup.
l
n
Parameter values, where the value is one of an enumeration or an on|off type; for example:
(config)> serial port1 enable t<Tab>
auto-completes to
(config)> serial port1 enable true
Auto-complete does not function for:
Parameter values that are string types.
n
Integer values.
n
File names.
n
Select parameters passed to commands that perform an action.
n
IX40 User Guide
defaultip
defaultlinklocal lan
Auto-complete commands and parameters
976
Advertisement
Table of Contents
