Digi IX40 User Manual page 120

Interfaces
n
n
n
n
IX40 User Guide
Set the ping_method:
l
(config network interface my_wan surelink tests 1)> ping_method value
(config network interface my_wan surelink tests 1)>
where value is one of:
o hostname: The hostname or IP address of an external server.
o Set ping_host to the hostname or IP address of the server:
(config network interface my_wan surelink tests 1)> ping_host hostname/IP_
address
(config network interface my_wan surelink tests 1)>
interface_gateway. If set, an initial traceroute is sent to the hostname or IP
o
address configured in the SureLink advanced settings, and then the first hop
in that route is used for the ping test.
o interface_address.
o interface_dns: The interface's DNS server.
Set the number of bytes to send as part of the ping payload:
l
(config network interface my_wan ipsec tunnel ipsec_example surelink tests 1)>
ping_size int
(config network interface my_wan surelink tests 1)>
dns: Performs a DNS query to the named DNS server.
If dns is set, set the IPv4 or IPv6 address of the DNS server:
(config network interface my_wan surelink tests 1)> dns_server IP_address
(config network interface my_wan surelink tests 1)>
http: Uses HTTP(s) GET requests to determine connectivity to the configured web
server.
If http is set, set the URL of the web server.
(config network interface my_wan surelink tests 1)> http url
(config network interface my_wan surelink tests 1)>
dns_configured: Tests communication with DNS servers that are either provided by
DHCP, or statically configured for this interface.
interface_up: Tests the current status of the interface. The test fails if the interface
is down. Failing this test infers that all other tests fail.
If interface_up is set, complete the following:
Set the amount of time that the interface is down before the test can be
l
considered to have failed.
(config network interface my_wan surelink tests 1)> interface_down_time value
(config network interface my_wan surelink tests 1)>
Wide Area Networks (WANs)
120