Table of Contents
Advertisement
Routing
a. Locate your device as described in
device.
b. Click the Device ID.
c. Click Settings.
d. Click to expand Config.
Local Web UI:
a. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click Network > Routes > Policy-based routing.
4. Click the g to add a new route policy.
5. For Label, type Domain-based policy.
6. For Interface, select ETH1.
7. Configure the source address:
a. Click to expand Source address.
b. For Type, select Zone.
c. For Zone, select Any.
8. Configure the destination address:
a. Click to expand Destination address.
b. For Type, select Domain.
c. Click to expand Domains.
d. Click the g to add a new domain.
e. For Domain, type youtube.com.
You can add additional domains by repeating the last two steps.
IX40 User Guide
Use Digi Remote Manager to view and manage your
IP routing
314
Advertisement
Table of Contents
