Services
Required configuration items
n
Enable Ethernet bonding.
n
The mode, either:
Active-backup. Provides fault tolerance.
l
Round-robin. Provides load balancing as well as fault tolerance.
l
The Ethernet devices in the bonded pool.
n
Create a new network interface for the bonded Ethernet devices, and disable the any interfaces
n
associated with those Ethernet devices..
É
Web
1. Log into Digi Remote Manager, or log into the local Web UI as a user with full Admin access
rights.
2. Access the device configuration:
Remote Manager:
a. Locate your device as described in
device.
b. Click the Device ID.
c. Click Settings.
d. Click to expand Config.
Local Web UI:
a. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click Network > Ethernet bonding.
4. For Add Bond device, click g
The bond device is enabled by default. To disable, toggle off Enable.
IX40 User Guide
Use Digi Remote Manager to view and manage your
Ethernet network bonding
620