Command line interface
update
Update firmware.
>
Display help for individual commands
When included with a command name, both ?and help provide further information about the
command. For example:
1. To display further information about the show command, type either show ?or show help:
> show ?
Commands
--------------------------------------------------------------------------
arp
Show ARP tables
cloud
config
containers
dhcp-lease
dns
Show DNS servers.
event
ipsec
Show IPsec statistics.
l2tp
Show L2TP statistics.
l2tppeth
location
log
Show syslog.
manufacture Show manufacturer information.
modbus-gateway Show modbus gateway status & statistics.
modem
mqtt
Show MQTT broker information
nemo
network
ntp
Show NTP information.
openvpn
route
Show IP routing information.
scep-client Show SCEP client statistics.
scripts
serial
Show serial statistics.
surelink
system
version
vrrp
Show VRRP statistics.
web-filter
> show
Use the Tab key or the space bar to display abbreviated help
When executed from the root command prompt, pressing the Tab key or the space bar displays an
abbreviated list of available commands:
IX40 User Guide
Show drm statistics
Show config deltas.
Show container statistics.
Show DHCP leases.
Show event list
Show L2TPv3 ethernet statistics.
Show loction information.
Show modem statistics.
Show NEMO statistics.
Show network interface statistics.
Show OpenVPN statistics.
Show scheduled scripts.
Show Surelink statistics.
Show system statistics.
Show firmware version.
Show web filter information.
Display help for commands and parameters
975