Pl 10.15 Exit Assembly - Xerox WorkCentre 4150 Service Manual

PL 10.15 Exit Assembly

Item Part Description
1 002N02802 Exit assembly (4250/4260/4265)
– 002N02554 Exit assembly (4150)
2 130N01601 Out bin full sensor (Q08-720), Exit
sensor (Q08-600) (Alternate)
– 130N01574 Out bin full sensor (Q08-720), Exit
sensor (Q08-600) (Alternate)
– 130N01274 Out bin full sensor (Q08-720), Exit
sensor (Q08-600)
3 121N01130 Duplex gate solenoid assembly
(REP 10.3)
4 – Duplex gate solenoid (SOL 08-870)
(P/O PL 10.15 Item
5 095N00382 Washer
6 – Spring (P/O PL 10.15 Item
7 – Actuator (P/O
8 – Spring (P/O PL 10.15 Item
9 – Duplex roll idler (P/O
1)
10 – Lower exit guide (P/O
Item 1)
11 007N01555 Gear
12 – E-Clip (Not Spared)
13 – Bush (P/O PL 10.15 Item
14 – Lower exit roll (P/O
1)
15 050N00499 Duplex gate (REP
16 – Bush (P/O PL 10.15 Item
17 – E-Clip (Not Spared)
18 – Upper exit guide (P/O
Item 1)
19 – Transport roll idler (P/O
Item 1)
20 022N02272 Duplex roll idler
21 – Pin (P/O PL 10.15 Item
22 – Transport roll (22A), Duplex roll
(22B) (P/O PL 10.15 Item
23 – Upper exit roller (P/O
1)
24 – Sensor cover (P/O
25 017N00266 Actuator
26 – Exit guide (P/O
27 007N01559 Gear
28 007N01513 Gear
29 121N01179 Static eliminator
30 – Exit assembly bracket (Not Spared)
NOTE: Alternate part number for Item 2, Out bin Full Sensor
are:130N01601 and 130N01574.
WorkCentre 4150/4250/4260WorkCentre 4150/4250/4260/4265WorkCentre
(REP 10.2)
3)
3)
PL 10.15 Item 3)
1)
PL 10.15 Item
PL 10.15
1)
PL 10.15 Item
10.3)
1)
PL 10.15
PL 10.15
1)
1)
PL 10.15 Item
PL 10.15 Item 1)
PL 10.15 Item 1)
January 2016
Parts List
PL 10.15