Rep 5.14 Duplex Sensor - Xerox DocuColor 2240 Service Manual

REP 5.14 Duplex Sensor

Parts List on PL 20.7
Removal
To avoid personal injury or shock, do not perform repair or adjustment activities with
the power switch on or electrical power applied to the machine.
1. Remove following:
a. Front Cover (PL 20.1).
b. Rear Cover (REP 5.18).
c. Top Cover (PL 20.2).
2. Remove Feed Motor (REP 5.5).
3. Remove Duplex Sensor (Figure 1).
a. Remove screws (2).
b. Lift Duplex Chute to disengage lower mounts.
c. Lift rear end of Duplex Chute so that Duplex Sensor is visible. Harness remains
connected.
d. Remove screw and remove Duplex Sensor.
Screws (2)
Figure 1 Removing Duplex Sensor
Repairs and Adjustments
REP 5.14
WARNING
Lower Mounts
02/03
4-32
Initial issue
DC 3535/2240/1632