Rep 1.11 Scanner Drive Motor - Xerox WorkCentre 3025BI Service Manual

REP 1.11 Scanner Drive Motor

Parts List on PL 4.1 and PL 4.2
Removal
1. Switch Off the Printer and unplug the Power Cord.
2. Remove the Scanner Module (REP 1.10)
3. Open the Scanner and release the Control Panel from the Scanner
a. Remove the screws (4).
b. Release the latches (2).
Screws
Figure 1 Control Panel Bottom Screws (Bottom View)
Xerox® WorkCentre® 3025 Multifunction Printer Service Manual
(Figure 1).
Latches
4. Disconnect the connectors (3) and remove the Control Console
Figure 2 Control Panel Removal (Front View)
June 2014
4-19
(Figure 2).
Connectors
Repairs
REP 1.11