REP 5.11 Registration Sensor
Parts List on
PL 20.5
Removal
To avoid personal injury or shock, do not perform repair or adjustment activities with
the power switch on or electrical power applied to the machine.
1.
Open Top Cover.
2.
Remove following:
a.
Front Cover (PL 20.1).
b.
Entrance Tray (PL 20.1).
3.
Remove Lower Chute Assembly
(REP
4.
Disconnect P/J580 and remove Registration Sensor (Figure 1).
1
Loosen
screw
Figure 1 Removing Registration Sensor
Prelaunch Training/Review
DC1632/2240
WARNING
5.8).
2
Remove
Registration
Sensor and
disconnect
Replacement
1.
When installing Registration Sensor align holes with bumps and tighten screw (Figure 2).
Figure 2 Installing Registration Sensor
6/02
4-29
Repairs and Adjustments
REP 5.11