Configuring The Tsq 9610 System - Thermo Scientific TSQ 9610 Hardware Manual

1
Performing Routine Maintenance

Configuring the TSQ 9610 System

Configuring the TSQ 9610 System
4 TSQ 9610 Hardware Manual
When you receive your TSQ 9610 system, a Field Service Engineer will configure the system
for you. However, if you need to reconfigure your system, follow these steps:
1. Place the TSQ 9610 instrument, GC, computer, monitor, and keyboard on a work table
and the foreline pump on the floor underneath.
Note If you are using CI, connect the reagent gas tubing to one of the Reagent Gas
Connectors on the TSQ 9610 instrument.
Figure 1. Configuring the TSQ 9610 System
Power Switch
Optional
Mech Pump
Connection
AC Input
Connector
Collision Gas
Intake
Accessory
Start
Connector
GC Start
Connector
System Mech Pump
Data System Connector
Reagent Gas (A & B) Connectors
Thermo Scientific