Thermo Scientific TSQ 9610 Hardware Manual page 444

3
Advanced Troubleshooting
Replacing Fans and Filters
414 TSQ 9610 Hardware Manual
Figure 453. Replacing the Air Deflector
6. Lift the air deflector carefully out of the instrument and replace it.
7. Carefully replace the air deflector so that it is positioned correctly behind the controller
interface board.
8. Reattach the two rivets holding the air deflector to the chassis cooling fan.
9. Reattach the four screws securing the left hand front panel to the chassis.
10. Restart your system by following the instructions in
Controller
Interface Board
Air
Deflector
Chassis Cooling
Fan
"Restarting the System" on
Thermo Scientific
page 158.