Thermo Scientific TSQ 9610 Hardware Manual page 370

3
Advanced Troubleshooting
Replacing the Boards in the TSQ 9610 Instrument
340 TSQ 9610 Hardware Manual
Figure 376. Removing the Heat Shield
Filament Board
Left
and Wires
Screw
Note Keep all manifold parts you remove covered on a clean work surface so they will not
accumulate dust.
13. Look through the top of the instrument and use the heat shield to pry the source interface
board off of the 20-pin feedthrough.
Figure 377. Detaching the Source Interface Board From the 20-Pin Feedthrough
20-Pin
Feedthrough
20-Pin Feedthrough
Pins in Source
Interface Board
Source Interface
Board
Heat Shield
Thermo Scientific