Thermo Scientific TSQ 9610 Hardware Manual page 305

Thermo Scientific
8. Set the manifold door right side up on a clean work surface and remove the two screws
holding the black clamp in place.
Figure 304. Removing the Clamp
Black Clamp
Screws
9. Remove the three screws holding the metal block to the front manifold plate.
Figure 305. Removing the Vacuum Interlock Handle
Screws
10. Set the vacuum interlock and all of its components aside.
3
Advanced Troubleshooting
Replacing Components of the Manifold
Front
Note: Tube
not
attached
TSQ 9610 Hardware Manual 275