Thermo Scientific TSQ 9610 Hardware Manual page 244

3
Advanced Troubleshooting
Replacing Components of the Ion Source
214 TSQ 9610 Hardware Manual
a. With your hand around the stainless steel barrel, twist the tool until the alignment
groove at the end of the barrel aligns with the left screw around the slot vacated by
the vacuum interlock knob.
Figure 214. Inserting the Ion Volume Tool
b. Twist and push the stainless steel barrel to the right until it clicks into place under the
screw at the top of the slot.
Figure 215. Twisting the Tool Into Place
Thermo Scientific