Thermo Scientific TSQ 9610 Hardware Manual page 316

3
Advanced Troubleshooting
Replacing Components of the Manifold
286 TSQ 9610 Hardware Manual
3. Open the manifold door and replace the magnet yoke, source retainer magnets, or
manifold o-ring as needed on the back of the door,
Figure 322. Replacing the Magnet Yoke, Manifold O-ring, and Source Magnets
Manifold O-ring
Magnet Yoke
4. Close the manifold door and reattach the four screws.
5. Restart your system by following the instructions in
Source Retainer Magnets
"Restarting the System" on page 158.
Thermo Scientific