Thermo Scientific TSQ 9610 Hardware Manual page 393

Thermo Scientific
connectors on the distribution board beneath it. It will click into place when its in the
right position.
Figure 402. Reinstalling the Controller Interface Board
Connectors
Figure 403. Reinstalling the Controller Interface Board
49. Reattach the support bracket.
50. Reattach the fan plenum and the front interior panel and tighten the screws.
51. Reattach the top cover and left hand front panels and tighten the screws.
52. Restart your system by following the instructions in
Replacing the Boards in the TSQ 9610 Instrument
Controller
Interface Board
Connectors
"Restarting the System"
3
Advanced Troubleshooting
on page 158.
TSQ 9610 Hardware Manual 363