Maintenance Supplies And Tools - Thermo Scientific TSQ 9610 Hardware Manual

Maintenance Supplies and Tools

Thermo Scientific
To perform routine maintenance on the TSQ 9610 instrument, you will need the supplies
and tools listed in the following table. The supplies in the VPI or NVAEI MS Toolkit or the
MS Toolkit are included in the toolkit shipped with your instrument.
Item
Cloth or paper, lint-free
Column measuring tool
Source exchange tool (VPI or NVAEI
depending on the ion source)
Small source exchange tool
Forceps
Gas, clean and dry
Gloves, clean, lint-free
Protective eye wear
Torx® T10 screwdriver
Torx® T20 screwdriver
Torx® T30 screwdriver
Wrenches, open-ended, 1/4-in.,
5/16-in., 3/8 in., 7/16-in.
Note The tools in the MS Toolkit are shipped in a black plastic case with the instrument.
Each tool in the kit can be ordered separately or you can order an additional toolkit. See
the ISQ and TSQ GC-MS Spare Parts Guide for ordering information.
a
A TSQ 9610 system with a VPI ships with the VPI MS Toolkit. A TSQ 9610 system with a NVAEI VPI ships
with the NVAEI MS Toolkit.
IMPORTANT Many nitrile and latex gloves not certified for clean room use contain
silicone mold releasing agents that will contaminate the instrument. For this reason, clean
room gloves are strongly recommended. We recommend Cardinal Health CP100 Nitrile
Cleanroom Gloves. See the ISQ and TSQ GC-MS Spare Parts Guide for ordering
information
In addition to the MS Toolkit, you can also purchase a TSQ 9610 Screw Kit, which includes
extra screws, nuts, and standoffs. Refer to the ISQ and TSQ GC-MS Spare Parts Guide l for
ordering information.
1
Performing Routine Maintenance
Included in
Included in
the VPI or
the MS
NVAEI MS
Toolkit
a
Toolkit
✓ ✓
✓
✓ ✓
✓ ✓
✓ ✓
✓ ✓
✓ ✓
✓ ✓
Maintenance Supplies and Tools
Not Included in
the MS Toolkit
✓
✓
✓
✓
TSQ 9610 Hardware Manual 3