Thermo Scientific TSQ 9610 Hardware Manual page 422

3
Advanced Troubleshooting
Replacing the Calibration Gas Components
392 TSQ 9610 Hardware Manual
Figure 430. Opening the Manifold Door
7. Open the manifold door.
8. Disconnect the calibration and reagent gas tubes from the gas mixing chamber.
9. Remove the screw on the lower right side that is holding the analyzer tray to the manifold.
Figure 431. Disconnecting the Analyzer Tray from the Instrument
Screws
Calibration and
Reagent Gas
Tubes
Right
Screw
Hole
Thermo Scientific