Thermo Scientific TSQ 9610 Hardware Manual page 382

3
Advanced Troubleshooting
Replacing the Boards in the TSQ 9610 Instrument
352 TSQ 9610 Hardware Manual
8. Remove the controller interface board and PC communication board from the
instrument.
Figure 390. Removing the Controller Interface Board Support Bracket
9. Remove the six screws holding the fan plenum to the chassis. Two are on the left side of
the instrument, and four are attached to the interior front panel.
10. Disconnect the fan from the distribution board.
11. Remove the entire fan plenum assembly including the fan and air deflector from the
instrument.
Controller
Interface Board
Support Bracket
PC Communication Board
Thermo Scientific