Thermo Scientific TSQ 9610 Hardware Manual page 216

3
Advanced Troubleshooting
Replacing Components of the Ion Source
186 TSQ 9610 Hardware Manual
14. Use a T20 Torxhead screwdriver to remove the two screws connecting the lens/source
heater to the source heater block. Replace the lens/source heater if necessary.
Figure 176. Disconnecting the Lens/Source Heater
15. Remove and replace the source heater block if necessary.
Figure 177. Replacing the Source Heater Block
Lens/Source
Heater
Screws and Cone
Washers
Source Heater
Block
Thermo Scientific