Thermo Scientific TSQ 9610 Hardware Manual page 468

4
Upgrade Equipment
Advanced EI Ion Source
438 TSQ 9610 Hardware Manual
Figure 480. Installing the AEI Source
14. Attach the wires to the source interface board. See
attaching the wires to the source interface board, see
Shield" on page 364.
Figure 481. Attaching the Wires to the Source Interface Board
15. Reattach the manifold door and the four screws.
16. Restart your system by following the instructions in
17. Store the ExtractaBrite source and the magnet parts in the AEI Case and screw the case
insert top down. See Figure 482.
Figure 481. For more instructions on
"Source Interface Board and Heat
"Restarting the System" on page 158.
Thermo Scientific