3
Advanced Troubleshooting
Replacing the Boards in the TSQ 9610 Instrument
356
TSQ 9610 Hardware Manual
the TSQ 9610 instrument. Use a T20 Torxhead screwdriver to remove the screws holding
the board and brackets to the chassis.
Figure 394. Locating the RF Boards and Brackets
.
18. To remove the front RF board, use your fingers to pry the brackets of the board away
from the chassis and toward the left side of the instrument.
19. Lift the board out of the instrument.
Rear RF
Screws
Brackets
Front RF
Board
Thermo Scientific