Thermo Scientific TSQ 9610 Hardware Manual page 255

Thermo Scientific
4. Place lens 2 on top of lens 3/RF lens with the small hole facing down. It should fit snugly
and sit evenly on top of lens 3/RF lens.
Figure 230. Inserting Lens 2 into the Source Sleeve
5. With the longer teeth of lens 1 facing down toward lens 2, align the larger metal section
of lens 1 with the sleeve window and let it fall into place.
Figure 231. Inserting Lens 1 into the Source Sleeve
Sleeve
Window
Larger Metal
Section
3
Advanced Troubleshooting
Replacing Components of the Ion Source
Small Hole of
Lens 2
Longer Teeth
of Lens 1
TSQ 9610 Hardware Manual 225