Thermo Scientific TSQ 9610 Hardware Manual page 205

Thermo Scientific
Figure 162. Replacing the Collision Cell and Quadrupole 3 in the Analyzer Tray
Q3 Quad
Assembly
Collision Cell
Assembly
16. Replace the analyzer tray into the instrument by following the instructions in
the Analyzer Tray in the TSQ 9610 Instrument"
17. Restart your system by following the instructions in
3
Advanced Troubleshooting
Replacing Components of the Analyzer
Q3 Exit Lens
Assembly
on page 154.
"Restarting the System"
TSQ 9610 Hardware Manual
Screws
"Replacing
on page 158.
175