Thermo Scientific TSQ 9610 Hardware Manual page 439

Thermo Scientific
Figure 448. Removing the Lens Driver Board
7. Loosening the screw will separate the board from the instrument. The screw is captured,
so do not attempt to completely remove it from the board and bracket.
8. Lift the lens driver board out of the instrument. Be careful as space is limited.
CAUTION - INSTRUMENT DAMAGE Limit handling of the boards as much as possible.
Do not touch any board components. Hold the board by the sheet metal bracket only.
ATTENTION DOMMAGES À L'INSTRUMENT Limitez au maximum la manipulation des
cartes. Ne touchez aucun composant de carte. Gardez la carte uniquement près du support
en tôle.
3
Advanced Troubleshooting
Replacing Fans and Filters
Lens Driver Board Screw
TSQ 9610 Hardware Manual 409