Digital Keypad - Delta EB3000 Series User Manual

Chapter 11 Optional AccessoriesEB3000

11-9 Digital Keypad

KPC-CC01
Descriptions of Keypad Functions
Key
Start Operation Key
1. Only valid when the source of operation command is the keypad.
2. Operates the AC motor drive by the function setting. The RUN LED will be ON.
3. Can be pressed repeatedly at the stop process.
Stop Command Key.
1. This key has the highest priority when the command is from the keypad.
2. When it receives the STOP command, regardless of whether the AC motor drive is in
3. Use the RESET key to reset the drive after a fault occurs.
4. If you cannot reset after the fault:
Operation Direction Key
1. Only controls the operation direction, NOT the drive activation. FWD: forward, REV:
2. Refer to the LED descriptions for more details.
ENTER Key
Goes to the next menu level. If at the last level, press ENTER to execute the command.
ESC Key
Leaves the current menu and returns to the previous menu; also functions as a return key or
cancel key in a sub-menu.
MENU key. Returns to the main menu. Menu items:
1. Parameter Setup
5. Copy Parameter
6. Fault Record
7. Language Setup
NOTE: Menu items that are not listed above are not supported in EB3000.
Communication Interface
RJ45 (socket), RS-485 interface
Communication protocol:
RTU19200, 8, N, 2
Installation Method
1. Embedded type and can be put flat on the surface of the
control box. The front cover is water proof.
2. Buy a MKC-KPPK model to do wall mounting or embedded
mounting. Its protection level is IP66.
3. The maximum RJ45 extension lead is 5 m (16ft)
4. This keypad can only be used on Delta's motor drive C2000,
CH2000, CP2000, and EB3000.
operation or stop status, the AC motor drive needs to execute the "STOP" command.
(1) The condition which triggers the fault is not cleared. After you clear the condition, you
can then reset the fault.
(2) The drive is in the fault status when powered on. After you clear the condition, restart
and then you can reset the fault.
reverse.
8. Time Setup
9. Keypad Locked
12. Display Setup
13. Start-up
Descriptions
14. Main Page
15.
PC Link
11-38