Delta EB3000 Series User Manual page 315

Chapter 8 Descriptions of Parameter SettingsEB3000
 The parameters record when the fault occurs and forces a stop. For the Lv, it records when it is
operating, or it warns without recording.
11-30
Accumulated Drive Power-on Time at the First Fault (Min.)
11-32
Accumulated Drive Power-on Time at the Second Fault (Min.)
11-34
Accumulated Drive Power-on Time at the Third Fault (Min.)
11-36
Accumulated Drive Power-on Time at the Fourth Fault (Min.)
11-38
Accumulated Drive Power-on Time at the Fifth Fault (Min.)
11-40
Accumulated Drive Power-on Time at the Sixth Fault (Min.)
VF
Control Mode
11-31
Accumulated Drive Power-on Time at the First Fault (Day)
11-33
Accumulated Drive Power-on Time at the Second Fault (Day)
11-35
Accumulated Drive Power-on Time at the Third Fault (Day)
11-37
Accumulated Drive Power-on Time at the Fourth Fault (Day)
11-39
Accumulated Drive Power-on Time at the Fifth Fault (Day)
11-41
Accumulated Drive Power-on Time at the Sixth Fault (Day)
VF
Control Mode
11-42
Frequency Command when the Most Recent Fault Occurred
VF
Control Mode
11-43
Output Frequency when the Most Recent Fault Occurred
VF
Control Mode
11-44
Output Current when the Most Recent Fault Occurred
VF
Control Mode
11-45
Motor Frequency when the Most Recent Fault Occurred
VF
Control Mode
86: Software brake over-current (Socb)
87: Brake resistor configuration error (brF)
88: Brake resistor is not connected (bro)
89: IGBT overload (oL3)
90: STO loss 4 (StL4)
91: STO loss 5 (StL5)
93: CANLift disconnection (CndL)
95: CANLift error (CnLF)
96: STO disconnection (Stod)
97: STO at running (Stor)
98: STO circuit sticking fault (StoS)
99: Ignore STO is ON (iSto)
100: Over Ripple Protection (orP)
SVC FOCPG
SVC FOCPG
SVC FOCPG
SVC FOCPG
SVC FOCPG
SVC FOCPG
FOCPM
FOCPM
FOCPM
FOCPM
8-11-4
Default: Read only
Default: Read only
Default: Read only
Default: Read only
Default: Read only
Default: Read only