Delta EB3000 Series User Manual page 18

2-2 Mechanical Installation
2-2-1 Mounting Considerations
Before mounting, ensure the mounting location is able to carry the drive, in both strength and

rigidity.
Mount the drive vertically to a sold flat surface.

Frame
A M6 x P1.0 + Grover (spring-lock) washer + flat washer
B M8 x P1.25 + Grover (spring-lock) washer + flat washer
Do NOT install the drive on an inflammable wall surface.

Recommended Screw Size
2-5
Chapter 2 InstallationEB3000
Recommended Screw
Torque
30–35 kg-cm
(26.04–30.38 Ib-in.)
(2.94–3.43 Nm)
95–100 kg-cm
(82.46–86.80 Ib-in.)
(9.32–9.81 Nm)
Table 2-1