Delta EB3000 Series User Manual page 136

6-2-2-5 Trial Run
Testing method:
1. Position the elevator near the middle floors.
2. Enter the correct values into Pr.00-02 and Pr.00-03.
3. Run the test using the upward / downward operation of the inspection mode.
4. If jerk occurs while elevator is running, see the table below (Pr.03-11) to set mechanical inertial
ratio:
Mechanical inertia reference value (%):
Load / Motor
Without load
With load
IM PM
40 10
80–120 40
6-19
Chapter 6 Tuning ProcessEB3000