Description Of Digital Keypad; How To Operate The Digital Keypad - Delta VFD-M Series User Manual

Description of Digital Keypad

The digital keypad includes two parts: Display panel and keypad. The display panel provides the
parameter display and shows the operation status of the AC drive and the keypad provides
programming and control interface.
Program/Function mode key
Selects normal mode/
program mode. Displays
the AC drive status, such as
output freq., selects the
parameters.
How to Operate the Digital Keypad LC-M02E
Se le ctio n mo d e
START
NOTE: In the selection mode, press
To se t pa ra mete rs
NOTE: In the parameter setting mode, you can press
To mo d ify d ata
START
To set direction
(When operation sour ce is digital keypad)
Enter Key
Press ENTER after
key in the elected
parameters or
change data.
Potentiometer
For master Frequency
setting refer to Pr.00.
MODE MODE
ENTER
or
or or
DIGITAL KEYPAD
RUN STOP FWD REV
MODE RUN
STOP
ENTER
RESET
50
VFD-M
100
0
FREQ SET
LC-M02E
MODE
to set the parameters.
ENTER
ENTER
move to previous
MODE
display
MODE to return to the selection mode.
English-5
LED Display
Indicates motor and
drive parameter.
LED Indicates
Lamp lights during RUN,
STOP, FWD & REV
operation.
Run key
Starts AC drive operation.
STOP/RESET Key
Stops and resets the
parameter after a fault
occurs.
UP and DOWN Key
Sets the parameter number
or changes the numerical
data such as the freq.
reference.
MODE MODE
GO START
parameter set
ENTER
successfully
or
parameter set
er ror