Terminals
Terminal Function
AFM1
AFM2
PINS 1, 2, 6, 7: Reserved
PIN 3: SGND
RJ45
PIN 4: SG-
PIN 5: SG+
PIN 8: EV
SW1
Switching USB port
Default (NPN mode)
0-10 V
, max. output current: 2 mA, max. load: 5 kΩ
DC
-10–10 V
, max. output current: 2 mA, max. load: 5 kΩ
DC
Maximum output current: 2 mA
Resolution: 0–10 V
DC
maximum operating frequency.
Range: 0–10 V
, -10–10 V
DC
DIP switch (SW1): NRM (default) / PRG (use this
side of the switch to update firmware). Updating
firmware should be done by qualified motor drive
service personnel only. Do NOT try to update the
firmware by yourself.
4-23
Chapter 4 WiringEB3000
, corresponding to the
DC
Table 4-13