Delta EB3000 Series User Manual page 165

Chapter 7 Summary of Parameter SettingsEB3000
Pr. Parameter Name
 07-30 Carrier Frequency
PWM Mode (Pulse-Width
 07-31
Modulation Mode)
Time for Decreasing
 07-32
Torque at Stop
 07-33 Cooling Fan Control
 07-36 Notch Filter Depth
 07-37 Notch Filter Frequency
 07-40 Start-up Display
Content of Multi-function
 07-41
Display
Setting Range
2–15 kHz
0: DPWM (Discontinuous Pulse Width
Modulation) mode
1: SVPWM (Space-Vector Pulse Width
Modulation) mode
0.000–5.000 sec.
0: Cooling fan is always ON.
1: One minute after AC motor drive
stops, cooling fan is OFF.
2: AC motor drive runs and cooling fan
is ON; AC motor drive stops and
cooling fan is OFF.
3: Cooling fan is ON to run when
preliminary IGBT temperature (°C)
reached.
4: Cooling fan is always OFF.
0–20 db
0.00–200.00 Hz
0: Display the Frequency command
value (LED F)
1: Display the actual output frequency
(LED H)
2: DC bus voltage (V)
3: Display the output current (A)
4: Output voltage (E)
5: User-defined (see Pr.07-41)
0: Display the output current supplied
to the motor from the drive (A) (Unit:
Amp)
1: Reserved
2: Display the drive's actual output
frequency (H) (Unit: Hz)
3: Display the drive's DC bus voltage
(v) (Unit: VDC)
4: Display the terminals U, V, and W
output voltage of the drive (E) (Unit:
VAC)
5: Display the terminals U, V, and W
output power factor angle to the motor
(n) (Unit: deg)
6: Display the terminals U, V, and W
output power to the motor (P) (Unit:
kW)
7: Display the actual motor speed in
rpm (r) (Unit: rpm)
7-24
Default
12
  
0
  
0.000

2
  
0

0.00

0
  
0
  







