Delta EB3000 Series User Manual page 119

Chapter 6 Tuning ProcessEB3000
6-1 Tuning in Easy Steps
1. Basic Parameter Settings
Pr.00-00 Parameter Reset
Pr.00-01 Control Mode
Pr.00-02 Master Frequency Command Source
Pr.00-03 Operation Command Source
2. Motor Auto-tuning
(1) Motor Settings
Pr.00-10 Motor Rated Power
Pr.00-11 Motor Rated Voltage
Pr.00-12 Motor Rated Current
Pr.00-13 Motor Rated Frequency
Pr.00-14 Motor Rated Speed
Pr.00-15 Number of Motor Poles
(2) Encoder Settings
Pr.00-20 Selection of Encoder
Pr.00-21 Encoder PPR
Pr.00-22 High Resolution SIN/COS and Communication Encoder
Pr.00-23 Encoder Input Type Setting
Pr.01-00–Pr.01-07 Multi-function Input Settings
Pr.01-10–Pr.01-15 Multi-function Output Settings
Pr.03-90 System Control (PM)
Pr.00-30 Motor Auto-tuning
3. Elevator Related Parameters
Pr.00-40 Elevator Speed
Pr.00-45 Motor Current at Acceleration
Pr.03-11 Mechanical Inertial Ratio
4. Multi-step Speed Settings
Pr.00-50–Pr.00-65 Multi-step Speed Settings
Pr.00-71–Pr.00-78 Acceleration / Deceleration Time Settings
Pr.00-90–Pr.00-95 S-curve for Acceleration and Deceleration Time Settings
5. Trial Run
6. Elevator Performance Fine-tuning
6-2