Choose Suitable Motor Cable and Precautions
An improper installation and wrong choice of motor cable would affect the performance of EMC
filter. Be sure to observe the following precautions when selecting the motor cable.
Use the motor cable with copper braid shielded wire (double shielded would be better).
Ground the copper braid shielded wire on both ends of the motor cable with the shortest
distance and largest contact area.
Remove the protective painting where the metal plate fixes with two-hole straps to ensure a
good contact, as Figure A below shows.
Connect the copper braid shielded wire of the motor cable correctly with the metal plate. Use
two-hole straps to fix both ends of the copper braid shielded wire of the motor cable on the
metal plate, as Figure B below shows.
Chapter 11 Optional AccessoriesEB3000
Figure A
Figure B
11-23