Delta EB3000 Series User Manual page 200

Acceleration and Deceleration Parameters
00-70
Starting Frequency
VF
Control Mode
Settings
 Determines the starting frequency. When the starting frequency (Pr.00-70) is larger than the
output frequency (Pr.03-55), the frequency output starts when the starting frequency (Pr.00-70)
reaches the F command.
 The drive runs as the speed curve shows above only when it is in VF (Pr.00-01=0) and SVC
(Pr.00-01=1) control mode and used with Pr.03-60 (cannot be se to 0).
SVC FOCPG
0.00–400.00 Hz
8-00-19
Chapter 8 Descriptions of Parameter SettingsEB3000
Default: 0.50