Delta EB3000 Series User Manual page 143

Chapter 7 Summary of Parameter SettingsEB3000
This chapter provides a summary of parameter (Pr.) setting ranges and defaults. You can set,
change and reset parameters through the digital keypad.
NOTE:
1. : You can set this parameter during operation
2. For details on parameters, refer to Chapter 8 Descriptions of Parameter Settings.
3. The following are abbreviations for different types of motors:
 IM: Induction motor
 PM: Permanent magnet synchronous AC motor
 IPM: Interior permanent magnet synchronous AC motor
 SPM: Surface permanent magnet synchronous AC motor
 SynRM: Synchronous reluctance motor
00 Basic Parameters
Pr. Parameter Name
00-00 Parameter Reset
00-01 Control Mode
Master Frequency
 00-02
Command Source
Operation Command
 00-03
Source
Setting Range
0: No Function
1: Read Only
5: Direct docking mode only, contact
Delta for more information.
8: Keypad Locked
9: Reset all parameters to defaults
(50 Hz)
10: Reset all parameters to defaults
(60 Hz)
0: V/F control (V/F)
1: Sensorless Vector Control (SVC)
2: FOC vector control + Encoder
(FOCPG)
3: FOC Permanent Motor control
(FOCPM)
1: RS-485 serial communication or
keyboard panel (KPED-LE02)
2: External analog input (Pr.01-20)
3: External digital input
4: Direct docking mode (Delta
CAN). Contact Delta for more
information.
5: Direct docking mode (Delta CAN
+ Terminal (FWD/REV)). Contact
Delta for more information.
6: CAN Lift. Contact Delta for more
information.
1: External terminals
2: RS-485 serial communication or
digital keypad (KPC-CC01)
3: Keyboard panel (KPED-LE02)
7-2
Default
0
  
0
  
1
  
1
  



