Delta EB3000 Series User Manual page 222

 When setting to 0, it is output frequency, not ASR output frequency.
01-41
Analog Output Gain 1

01-44
Analog Output Gain 2

VF
Control Mode
Settings
 Sets the corresponding voltage for the analog output 0.
01-42
Analog Output Value in REV Direction 1

01-45
Analog Output Value in REV Direction 2

VF
Control Mode
Settings
16: q-axis voltage
17: d-axis voltage
18: Torque command
19–20: Reserved
21: Power output
SVC FOCPG
0–200%
SVC FOCPG
0: Absolute value in output voltage
1: Output 0 V in REV direction
2: Enable output voltage in REV direction
Analog output direction selection
8-01-17
Chapter 8 Descriptions of Parameter SettingsEB3000
FOCPM Default: 100.0
FOCPM Default: 0