Table of Contents
Advertisement
Chapter 6 Tuning ProcessEB3000
11: Fault indication
12: Mechanical brake release (Pr.03-00, Pr.03-01, Pr.02-02)
13: IGBT overheat warning (oH1)
14: Brake transistor signal
15: Motor-controlled magnetic contactor output
16: Slip error (oSL)
17: Fault indication 1
18: Reserved
19: Brake transistor output error
20: Warning output
21: Over-voltage
22: Over-current stall prevention warning
23: Over-voltage stall prevention warning
24: Operation mode indication (Pr.00-03=1)
25: Forward command
26: Reverse command
27: Output when current ≥ Pr.02-03
28: Output when current < Pr.02-03
29: Reserved
30: Reserved
31: Power generation direction and status verification
32: Power generation direction
33: Zero speed (actual output frequency)
34: Zero speed with Stop (actual output frequency)
35: Fault output option 1 (Pr.02-71)
36: Fault output option 2 (Pr.02-72)
37: Fault output option 3 (Pr.02-73)
38: Fault output option 4 (Pr.02-74)
39: Reserved
40: Speed reached (including zero speed)
41: Reserved
42: STO output status
43–44: Direct Docking Mode only
45: Reserved
46: Retrying after a fault has occurred indication
47: Direct Docking Mode only
48: Control output of MPSCC (Motor Phase Short Circuit Contactor)
49: Emergency power mode action
6-11
Advertisement
Table of Contents
