Delta EB3000 Series User Manual page 292

Bit Bit9
Terminal MI8
Status 0
0: OFF; 1: ON
MI1: Set Pr.01-00 to 1 (multi-step speed command 1).
MI6: Set Pr.01-05 to 8 (the 1st, 2nd acceleration/deceleration time selection).
If REV, MI1 and MI6 are ON, the value is 0000 0000 1000 0110 in binary and "0086H" in HEX.
Meanwhile, if you set Pr.07-41 to 16, the built-in keyboard KPED-LE02 user-defined page
displays "0086".
 Example 2:
Bit Bit5
Terminal MO2
Status 0
0: Normally open (N.O.); 1: Normally closed (N.C.)
MO1: Set Pr.01-14 to 9 (Drive is ready)
After applying the power to the AC motor drive, if there is no other error, the contact is N.C., the
value is 0001 0000 in binary and "0010H" in HEX. Meanwhile, if you set Pr.07-41 to 17, the
built-in keyboard KPED-LE02 user-defined page displays "0010".
07-42
Speed Unit

VF
Control Mode
Settings
 Setting value 1 and 2: To display the correct speed on the display panel, values entered into
Pr.00-42, Pr.00-43 and Pr.00-44 must be correct.
Limit and Adjustment of Drive's Voltage and Current
07-50
Automatic Voltage Regulation (AVR) Function

VF
Control Mode
Settings
 The AVR function automatically regulates the AC motor drive output voltage to the motor's rated
voltage when the input power is larger than the motor's rated voltages. For instance, if you set
V/F curve to 200 V
voltage to the motor is automatically regulated to 200 V
to 200 V
, the output voltage to the motor and the input voltage is in direct proportion to the
AC
input voltage.
Bit8 Bit7 Bit6
MI7 MI6 MI5
0 1 0
Bit4 Bit3 Bit2
MO1 RA4 RA3
1 0 0
SVC FOCPG
0: Hz
1: m/s
2: ft/s
3: Direct docking mode only, contact Delta for more information.
SVC FOCPG
0: Enable AVR
1: Disable AVR
2: Disable AVR when decelerating to stop
/50 Hz and the input voltage is between 200–264 V
AC
Chapter 8 Descriptions of Parameter SettingsEB3000
Bit5 Bit4
MI4 MI3
0 0
Bit1 Bit0
RA2 RA1
0 0
FOCPM
FOCPM
/50 Hz. If the input voltage is from 180
AC
8-07-9
Bit3 Bit2 Bit1
MI2 MI1 REV
0 1 1
Default: 0
Default: 0
, then the output
AC
Bit0
FWD
0